Foster FADPRT2 - Important Note

Fi ng The Door
Hold the door at a 90° angle to the cabinet and lower the door on to the hinges, see (fi g 10) for the correct
hinge alignment in the closed posi on. Check that it hangs squarely to the cabinet.
Fig 10
Fig 8
Fig 9
Re-fi t the unit cover and check that the top of the door lines up with the bo om of the unitcover.
To remove the door, reverse the process.
A er hanging the door inspect the door gasket. Ensure that it seals fully to the doorframe.
Also ensure that the door wiper gasket, fi  ed to the bo om of the door is in contact with the fl oor
(see fi g 11).
English
7
Important Note !
If the ceiling panel has been  pped during installa on. The product should not be switched on for 24hrs.