Foster HR80MF - Keypad Unlock

4
Set point: Display and modication
> Press button and hold to display the set point.
> By keeping button pressed, use button or to set the desired value (adjustment is within the minimum
SPL and the maximum SPH limit)
> When button is released, the new value is stored.
Standby
When pressing the button for 3 seconds, will allow the controller to be put on a standby or output control to be
resumed (with SB = YES only). When on Standby will be displayed.
Keypad Unlock
Press & release then use to select ‘LOC’. Press and hold to change from ‘YES’ to ‘NO’. Leave for 10
seconds or briey press to resume.
Defrost
Automatic Defrost
The cabinet will defrost automatically on a predened schedule. This setting will also automatically terminate on a
predened schedule.
Manual Defrost. (Freezer Sections only)
To initiate a manual defrost press and hold the defrost button for 2 seconds
Controller Connection Drawing and Dimensions
(Dimensions in mm)