7
COMPRESSION ADJUSTMENTS
Turn all adjusters to the closed position (full clockwise) until they stop. Then back them out (counter-
clockwise) to the number of clicks shown in the tables found in the Recommended Settings section.
2-POSITION LEVER
Begin with the 2-position lever in the OPEN mode.
Low-speed compression (LSC) adjustment is
useful to control shock performance under rider
weight shifts, G-outs, and other slow inputs.
High-speed compression (HSC) adjustment is
useful to control shock performance under bigger
hits, landings, and square-edged bumps.
The 2-position lever is useful to make on-the-
fly adjustments to control shock performance
under significant changes in terrain, and is
intended to be adjusted throughout the ride.
The Open mode utilizes your standard HSC/
LSC, preset high- and low-speed compression
settings. The preset high- and low-speed
compression adjustments only have an aect
on compression damping when the lever is in
the OPEN position. The FIRM mode has a very
firm low-speed compression setting and is
useful for climbing and sprinting.
OPEN
FIRM
LOW-SPEED COMPRESSION
3 MM HEX
HIGH-SPEED COMPRESSION
6 MM HEX
To Next Page
Loading...
