Fox F28-191 - Machine Description; Component Overview

38
List of parts included in the package:
- One bandsaw complete with blade (assembled)
- One workbench
- One sliding rail for the rip fence
- One rip fence
- One coupling for a dust collection device
- One pusher
- 4 legs
- 4 bars
- 2 wheels
- Various nuts and bolts
Front side of the machine
1. Door of the upper flywheel
2. Knob for the adjustment of
bandsaw’s tensioning
3. Blade’s upper flywheel
4. Knob for the adjustment of the
protective cap
5. Protection
6. Bandsaw’s saw blade
7. Workbench
8. Guiding rail with graduated scale
9. Lower flywheel
11. Rip and trimming fence
12. Door of the lower flywheel
13. ON / OFF switch
Back side of the machine
14. Knob for the adjustment of the upper
flywheel
15. Motor
16. Base
17. Dust collection sleeve
18. Knob for the adjustment of the
driving belt
19. Bench inlay
MACHINE DESCRIPTION