27
661M03 Series User Manual
Chapter 2 Installation Instructions
Warning:
The motherboard may be damaged if a 3.3V AGP card is used. Make
sure that your AGP card is 1.5V specification. Note the notches on
the card golden fingers to ensure that they fit the AGP slot on your
motherboard.
Installing an expansion card
1. Before installing the expansion card, read carefully the documentation that
came with it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing any expan-
sion cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated in the slot.
5. Secure the card to the chassis with the screw you removed earlier.
AGP Qualified Vendor List
The following table lists the CPU modules that have been tested and qualified
for use with this Motherboard.
Vender Type Video Memory
MSI MS-8895 GeForce 4 MX 440 8X 64MB
MSI MS-8904 GeForce FX5800 8X 128MB
MSI MS-8907 GeForce FX5200 8X 128MB
MSI MS-8911 GeForce FX5200 8X 128MB
MSI MS-8912 GeForce FX5600 8X 128MB
MSI MS-8912 GeForce FX5900 8X 128MB
MSI MSI Ti4200-VTD 8X 128MB
ASUS V9569/TD FX5600 8X 128MB
ATI ATI Radeon 9700 8X 128MB
To Next Page
Loading...
Need help?
General
