39
661M03 Series User Manual
Chapter 3 BIOS Description
Advanced BIOS Features
CPU Feature
Press enter to set the items of CPU feature. Please refer to page 42.
Virus warning (Default: Disabled)
Allows you to choose the VIRUS warning feature for IDE hard disk boot sector
protection. If this function is enabled and someone attempt to write data into
this area, BIOS will show a warning message on screen and an alarm will
beep. The available setting values are: Disabled and Enabled.
Note: Such function provides protection to the start-up sector only; it does not
protect the entire hard disk.
CPU L1 & L2 Cache (Default: Enabled)
This option is used to turn on or off the CPU L1 and L2 cache. The available
setting values are: Disabled and Enabled.
CPU L3 Cache (Default: Enabled)
This option is used to enable or disable CPU L3 cache. The available setting
values are: Disabled and Enabled.
Hyper-Threading Technology (Default: Enabled)
This option is used to turn on or off the Hyper-threading function of the CPU.
The available setting values are: Disabled and Enabled.
Note: This function will not be displayed until a CPU that supports Hyper-
Threading has been installed.
CPU L2 Cache ECC Checking (Default: Enabled)
This option is used to enable or disable CPU L2 cache ECC Checking. The
available setting values are: Disabled and Enabled.
Advanced BIOS Features Menu
To Next Page
Loading...
Need help?
General
