Foxconn D42S 3.0 User Manual

27
3
Integrated Peripherals
► IDE Configuration / OnBoard Configuration / SuperIO Configuration / USB Configuration
Press <Enter> to go to relative submenu.
IDE Conguration
► Configure SATA as
This item allows you to set the operation mode of the SATA ports. Setting values are: [IDE],
[AHCI], [Disabled].
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Integrated Peripherals
► IDE Conguration
[Press Enter] Help Item
► OnBoard Conguration
[Press Enter]
► SuperIO Conguration [Press Enter]
Congure the IDE
► USB Conguration
[Press Enter] device(s) .
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
IDE Conguration
IDE Conguration
Help Item
Congure SATA as [IDE]
IDE
AHCI
Disabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[IDE]
Options

Foxconn D42S 3.0 Specifications

General

Brand	Foxconn
Model	D42S 3.0
Category	Motherboard
Language	English