Foxconn D42S 3.0 - Usb Configuration

30
3
USB Conguration
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB Storage Configuration
After pressing <Enter>, you can set the reset delay for the USB storage device. There are
many different emulation types of this USB device, such as oppy, hard disk and CDROM can
be selected.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
USB Conguration
USB Conguration
Help Item
Module Version - 2.24.5-14.4 Enables support for
legacy USB. AUTO
USB Devices Enabled :
option disables
None legacy support if
no USB devices are
Legacy USB Support [Enabled] connected.
► USB Storage Configuration
[Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]