34
3
BIOS Security Features
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input
user password optionally.
If you have installed the supervisor password, the following
items will appear:
► Change User Password
This item is used to install or change user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
► Trusted Computing
Press <Enter> to go to its submenu.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
BIOS Security Features
Supervisor Password : Installed Help Item
User Password : Installed
Install or change the
Change Supervisor Password
[Press Enter] password.
Change User Password
[Press Enter]
Password Check [Setup]
► Trusted Computing
[Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
Enter New Password :
To Next Page
Loading...
Need help?
General
