Foxconn G41S Series - Superio Configuration

3
31
SuperIO Conguration
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► Serial Port1 Mode
This item enables you to determine the transfer mode of the serial port 1.
► OnBoard IrDA Port
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard IrDA
port.
► IrDA Duplex Mode
This item enables you to determine the infrared function of the onboard infrared chip.
► OnBoard CIR Port
This item is used to disable or assign the I/O address for onboard infrared chip.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Conguration
SuperIO Configuration Help Item
Serial Port1 Address
[3F8/IRQ4] Allows BIOS to Select
Serial Port1 Mode
[Normal] Serial Port1 Base
OnBoard IrDA Port
[2F8/IRQ3] Addresses .
IrDA Duplex Mode
[Half Duplex]
OnBoard CIR Port
[Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[3F8/IRQ4]