Foxconn H77M Series User Manual

4
52
4
52
2.5 Limit Setting - FAN1 Fan
This page lets you to set FAN1 fan low limit rpm and enable the alert function.
3. Fan Page - Fan Control
This page lets you enable Smart Fan function or set the fan speed by manual.
When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
Set low limit rpm by
dragging the lever
Show current FAN1
fan rpm value
Enable alert function
when the FAN1 fan
runs slower than low
limit rpm value
Show current low limit
rpm value of FAN1 fan
Go to Fan page
Set fan speed by
dragging the lever
Enable or disable
smart fan function
Apply the changes

Foxconn H77M Series Specifications

General

Brand	Foxconn
Model	H77M Series
Category	Motherboard
Language	English