To Next Page

To Previous Page

RAID CONFIGURATION

5-4 Create a RAID driver diskette

If you want to install a brand new Windows XP on a AHCI or RAID system, you need to

conguretheSATAModeinBIOStoeitherAHCIorRAIDrst.YoualsoneedtocreateaRAID

driver diskette for use in installing your Windows XP system.

Windows 7 has native RAID driver in itself, you can skip these steps.

1.FindaPC,putadisketteintoitsoppydriveA:,thisdiskettewillbeformattedlater.Putthe

driver CD into DVD-ROM drive.

2.Dependingonwhichplatformyoursystemis,

 normally,itisa32-bitXPsystem.Use

 Windowsexplorer,andgotoCD:\Driver\Intel\

 RAID\Floppy\32bit,clickonRaidTooliconto

start the creation.

3.Click"GO"tostart.

4.SelectthedesireddestinationFDDdrive.It

can be the default drive A: or any USB FDD.

 Click"OK"tocontinue.

5.Insertadiskette,click"OK"tocontinue.

6. You can input a volume label for this diskette,

 click on"Start"toformat.

7.Clickon"OK"togothroughthis

warning message.

Foxconn H77MXV-D User Manual

Questions and Answers: