RAID CONFIGURATION
86
Intel(R)MatrixStorageManageroptionROMv5.0.0.1011ICH9RwRAID5
Copyright(C)2003-04IntelCorporationAllRightsReserved.
Name Level Drives Capacity Status Bootable
TryRAID0 ID0(Stripe)2 465.8GB Normal Yes
Deleting a volume will reset the disks to non-RAID.
WARNING:ALLDISKDATAWILLBEDELETED.
(This does not apply to Recovery volumes)
[↑↓]-Select[ESC]-PreviousMenu[DEL]-DeleteVolume
Intel(R)RapidStorageTechnology-UptionROM-11.0.8.1204
Copyright(C)2003-11IntelCorporation.AllRightsReserved.
[ HELP ]
[ DELETE VOLUME MENU ]
TryRAID5 RAID5(Parity)3 149.1GB NormalYes
ALLDATAONSELECTEDDISKSWILLBELOST!
(This does not apply to Recovery volumes)
Areyousureyouwanttodelete"TryRAID5"?(Y/N):
[ DELETE VOLUME VERIFICATION ]
4.ReturntoMainMenu.
Intel(R)MatrixStorageManageroptionROMv5.0.0.1011ICH9RwRAID5
Copyright(C)2003-04IntelCorporationAllRightsReserved.
1.CreateRAIDVolume 4. Recover Volume Options
5.AccelerationOptions
3. Reset Disks to Non-RAID 6. Exit
5.
RAID Volume :
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 HitachiHDS72161 PVF904Z21G2JZM 149.0GB Non-RAID Disk
1
ST380811AS
5PS1TAGW 74.5GB Non-RAID Disk
2
SAMSUNG HD161HJ
S0V3J9APA30524 149.0GB Non-RAID Disk
3
ST380815AS
5RW1CA37
74.5GB Non-RAID Disk
Intel(R)RapidStorageTechnology-UptionROM-11.0.8.1204
Copyright(C)2003-11IntelCorporation.AllRightsReserved.
[DISK/VOLUMEINFORMATION ]
[ MAIN MENU ]
2.DeleteRAIDVolume
[↑↓]-Select[ESC]-Exit[ENTER]-SelectMenu
4. Reset Disks to Non-RAID
Reset RAID volume allows you to replace a failed disk with a new one, and the operating
system will rebuild the data later. For RAID0, reset a hard disk would totally crash the system,
butforRAID1,RAID10andRAID5,theyallcanberebuilt.
Whenrebuildisneeded,youmustrstinstallanewharddiskinyoursystembeforegettinginto
Intel®RapidStorageTechnologyenterpriseutility,becausetheutilitywillaskyouwhichhard
disk the new rebuild will be performed.