13
top). The blue bird topper has a plastic sleeve that slides down on the
tip of the decoy support rod. Locate the decoy on/off toggle switch on
the side of the HellCat Pro and ensure that it is in the “on” position (to
the right). Turn on the HellCat Pro and HellCat Pro remote. The AUX
button on the HellCat Pro remote control is responsible for remotely
toggling the decoy motion off and on. If the decoy is in motion, push
the AUX button one time to stop it and once more to start motion
again.
3. Auxiliary Device Jack Specifications
The auxiliary jack is primarily used to connect a FOXPRO decoy such as
the XDECOY. When a FOXPRO decoy is connected to the jack with the
appropriate 3.5mm cable, you can use the AUX button on the HellCat
Pro remote to turn the motion off and on.
4. HellCat Pro Remote in Depth
This section covers all aspects of the Hellcat Pro remote control.
4-1 Navigating the HellCat Pro Remote
The Hellcat Pro remote has a scroll up and scroll down button for
cycling through the on-screen display. A selected menu item is
highlighted with a horizontal bar and, by pressing the scroll up or down
arrow button, that horizontal bar will move up or down through the
menu items list. To make menu selections, use the “Play/Select”
button. The “Back/Menu” button allows you to access the Hellcat Pro
Remote menu configuration and step back one level in the menu
system.
4-2 Understanding the HellCat Pro Remote-Control Display
The Hellcat Pro remote-control screen can be viewed in three main
segments: top status line, primary display area, and bottom status line.
The top and bottom status lines are static— meaning that they will
To Next Page
Loading...
