21
Restore Defaults
To reset your Hellcat Pro remote control back to factory defaults, use
this option. Please be aware that restoring factory defaults will result in
loss of your presets/favorites, sound list, and categories.
4-9 HellCat Pro Remote USB Port Operation
The Hellcat Pro remote control features a mini-USB port inside of the
battery compartment, just above the batteries. In order to connect the
remote to a computer, you will need to obtain a mini-USB type A/B
cable. After connecting the cable between the remote and your
computer, turn on the remote. The screen should now display “USB
Active” instead of the normal screen.
When the Hellcat Pro remote is connected to a computer, you can
browse through the device just as you would any other USB storage
device. Inside of the file system, you should encounter two files. These
files are: “presets” and “categories.txt”.
5. FOXFEATURES
This section explores all the available FOX FEATURES in-depth to help
you understand how to use them and get the most out of your calling
experience.
It is important to note that some FOX FEATURES are not compatible
with other FOX FEATURES and some remote operations will override
FOX FEATURES when called upon. As a result, there may be times when
you try to perform an operational change with the Hellcat Pro remote
that results in a pop-up message asking you if you wish to cancel the
current FOXFEATURE to enable the desired operation.
Regarding most FOX FEATURES, you have engaged (except FOXBANG), if
you change the primary sound from one sound to another, it will
automatically disengage the active FOX FEATURE. FOX FEATURES will
To Next Page
Loading...
