14
always be present. The primary display area is dynamic and will change
depending upon the operation that you are performing.
On the top line of the screen is the FOXBANG/FOXGRIP status indicator
(the letters “FB” appear above the screen). If FOXBANG is activated, it
will display “FB”. If FOXGRIP is activated, it will display “FG”. If both are
activated, it will display “FB/FG”. To learn more about these specific
features, please refer to the FOXFEATURES section of the manual.
The primary display area for the Hellcat Pro remote (with default
settings) begins with “Categories” at the stop, which is the title of this
screen. When you enter other menu sections, the title will change
accordingly. The two main items on the screen “Favorites/Presets” and
“FoxCast” options are always available on this screen (in both Category
and Sound List mode). Directly beneath “FoxCast” begins the category
listings. If using sound list mode, you will then see “Sound List” as the
third option.
Along the bottom of the screen is the status line. This line features
(from left to right):
• “MT” is the mute status indicator. If muted, the screen will
display an “M”.
• “VOL” indicates the volume level from 0-30.
• “BATT” displays the battery level of the HellCat Pro remote.
• “TIME(R)” displays either the stand timer or real-time clock.
When an alarm is indicated, the background will blink.
4-3 HellCat Remote Configurations Menu
From the sounds screen, push the “Back/Menu” button a single time.
This will get the Hellcat Pro configuration menu to appear. There are a
total of six elements that will appear on this menu: FOX FEATURES,
Sound Settings, Display/Power, Date/Time(r), TX1000 Settings, and
Smart Light.
To Next Page
Loading...
