● Freeze Frame Data
● Clear Codes
● Live Data
● I/M Readiness
● O2 Sensor Test
● On-board Monitor Test
● Component Test
● Vehicle Information
● Modules Present
● Code Lookup
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by the
year, model, and make of the test vehicle. A “Not supported the mode!” message displays if the option
is not applicable to the vehicle under test.
7 System Setup
This section illustrates how to program the scanner to meet your specific needs.
When Settings is selected, a menu with available service options displays. Menu options typically
include:
● Language
● Unit
● Shortcuts
● Display Test
● Keypad Test
● About
7.1 Select Language
Selecting Language opens a screen that allows you to choose system language. The scan tool is set
to display English menus by default.
To configure system language:
1. Scroll with the arrow keys to highlight Language from Settings menu and press ENTER key.
To Next Page