NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
2. Press the YES/NO key to confirm.
3. Wait a few seconds or press YES/NO key to continue.
√ Some vehicle may not support this function, and a “Not
Support This Function!” message display.
4. Use the SCROLL key to select an available item from
Vehicle Information
screen.
5. Press the YES/NO key to view retrieved information.
6. Press the YES/NO key return.
NOTE Not all data is supported by all vehicles.
5.7 Exiting Test
To exit OBDII test:
Vehicle Information
Turn Key on
with Engine off!
Any key to continue.
Vehicle Information
Calibration ID
Cal. Verif. Number
Exit
Calibration ID
Cal ID1:
09G927750EK_0706
To Next Page
Loading...
