NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
1. Use the SCROLL key to select Exit from
Diagnostic
Menu
screen.
2. Press the YES/NO key to confirm.
3. To quit test, use the SCROLL key to select YES and
press YES/NO key.
√ If not to exit, use the SCROLL key the select NO and
press the YES/NO key.
6. Updating the Code Reader
NT200 is able to be updated to keep you stay current with the
latest development of diagnosis.
√ The update of NT200 consists of two parts: program
upgrade and DTC upgrade.
√ To update the code reader, you need following tools:
● NT200 Code Reader
● Update Tool Downloaded in Our Website
● PC or Laptop with USB Ports and Internet Explorer
● USB Cable
√ To be able to use update tool, PC or laptop must meet
the following minimum requirements:
● Operation System: Win98/NT, Win ME, Win2000, Win
Diagnostic Menu
I/M Readiness
Vehicle Information
Exit
Exit Test
Are You Sure to
Exit Test?
<YES> NO
To Next Page
Loading...
