NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
To view freeze frame data:
1. Use the SCROLL key to select Freeze Data from
Diagnostic Menu
screen
2. Press the YES/NO key to confirm.
3. View freeze frame data on screen. If more than one
screen of information is retrieved, use the SCROLL key
to view additional data.
√ If no freeze frame detected, a “No Freeze Data Found!”
message displays.
√ Some vehicle may not support this function, and a “Not
Support This Function!” message display.
4. Press the YES/NO key to return to
Diagnostic Menu
.
5.5 Reading I/M Readiness Status Data
The
I/M Readiness
function is used to view a snapshot of the
operations for the emission system on OBDII/EOBD vehicles.
√ I/M Readiness is a useful function used to check if all
monitors are OK or N/A.
√ The vehicle’s computer performs tests on the emission
system during normal driving conditions. After a
specific amount of drive time (each monitor has specific
driving conditions and time required), the computer’s
Diagnostic Menu
Read Codes
Clear Codes
Datastream
Freeze Data
Freeze Data
DTCFRZF P0157
FUELSYS1 OL
FUELSYS2 OL
LOAD_PCT (%) 0.0
To Next Page
Loading...
