Foxwell NT200 - Page 22

NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
22
monitors decide if the vehicles emission system is
working correctly. When the monitor’s status is:
● OK - vehicle was driven enough to complete the
monitor.
● INC (Incomplete) - vehicle was not driven enough to
complete the monitor.
● N/A (Not Applicable) - vehicle does not support that
monitor.
√ I/M Readiness function is performed with the KOER or
KOEO.
√ There are two types of I/M Readiness tests:
● Since DTCs Cleared - shows status of the monitors
since the DTCs were last cleared.
● This Drive Cycle - shows status of monitors since the
start of the current drive cycle.
√ Below is a list of abbreviations and names of OBD II
monitors supported by the code reader.
No.
Abbreviation
Name
1
Misfire Monitor
Misfire Monitor
2
Fuel System Mon
Fuel System Monitor
3
Comp.
Component
Comprehensive Components
Monitor
4
Catalyst Mon
Catalyst Monitor
5
Htd Catalyst
Heated Catalyst Monitor
6
Evap System
Mon
Evaporative System Monitor
7
Sec Air System
Secondary Air System Monitor
8
A/C Refrig Mon
Air Conditioning Refrigerant Monitor
9
Oxygen Sens
Mon
Oxygen Sensor Monitor
10
Oxygen Sens Htr
Oxygen Sensor Heater Monitor
11
EGR System
Mon
Exhaust Gas Recirculation System
Monitor
NOTE Not all monitors are supported by all vehicles.
To retrieving I/M Readiness Status data:
1. Use the SCROLL key to select I/M Readiness from
Diagnostic Menu screen.