NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
2. Press the YES/NO key to confirm.
√ If vehicle supports both types of monitors, please
following screen:
√ Use the SCROLL key to select a monitor type and press
the YES/NO key to confirm.
3. Depending on readiness test, one of these 2 screens
will be present.
Or
Diagnostic Menu
I/M Readiness
Vehicle Information
Exit
I/M Readiness
Since DTCs Cleared
This Drive Cycle
Exit
Since DTCs Cleared
MIL Status OFF
Misfire Monitor N/A
Fuel System Mon N/A
Comp. Component OK
To Next Page
Loading...
