18
AutoMaster Pro NT414 Manual_English_V1.00
Figure 4-15 Sample auto scan screen
4. If there is diagnostic trouble code(s) detected in a control unit, press the function key
corresponding with Display DTC on the screen to view details of code information, and press
the function key Quick Erase to clear them.
Figure 4-16 Sample Display DTC screen
5. Select the system you would like to test, and press the ENTER key. When the scanner has
established connection with the vehicle, the Function Menu displays.
Figure 4-17 Sample Function Menu screen
Control Unit screen displays all controllers available of the vehicle manufacturer. The controllers
listed on the menu do not mean that they are installed on the vehicle.
To Next Page
Loading...
