Foxwell NT414 - Freeze Frame Data; Erase Codes

21
AutoMaster Pro NT414 Manual_English_V1.00
3. Press function key Save to store DTC information. Or use the BACK key to exit.
4.3.2 Freeze Frame Data
Freeze Frame Data menu displays freeze frame data, a snapshot of critical vehicle operating
conditions automatically recorded by the on-board computer at the time of the DTC set. It is a
good function to help determine what caused the fault.
To view freeze frame data:
1. Select Freeze Frame Data from the Function Menu. Details of freeze frame data displays.
Figure 4-22 Sample function menu screen
2. Use the arrow keys to scroll back and forth through different screens of data.
Figure 4-22 Sample Freeze Data screen
3. Press function key Save to store freeze frame information. Or use the BACK key to exit.
4.3.3 Erase Codes
Erase Codes menu lets you to clear all current and stored DTCs from a selected control module.
Also it erases all temporary ECU information, including freeze frame. So make sure that the
selected system are completely checked and serviced by technicians and no vital information will
be lost before clearing codes.
NOTE
● To clear codes, make sure that the ignition key is switched to ON with the engine off.
● Erase Codes does not fix the problem that caused the fault! DTCs should only be erased after
correcting the condition(s) that caused them.
To clear codes:
1. Scroll with the arrow keys to highlight Erase Codes from Function Menu and press the ENTER
key.