19
AutoMaster Pro NT414 Manual_English_V1.00
To select a system for testing:
1. Scroll with the arrow keys to highlight Control Unit from the menu and press the ENTER key. A
controller menu displays.
Figure 4-18 Sample Control Unit Menu Screen
2. Select the system you would like to test. When the scanner has established connection with the
vehicle, the Function Menu displays.
Figure 4-19 Sample Common menu screen
4.3 Diagnostic Function Selection
After a system is selected and the scanner establishes communication with the vehicle, the
Function Menu displays. The menu options may include:
Not all function options listed above are applicable to all vehicles. Available options may vary by
the year, model, and make of the test vehicle. A “The selected mode is not supported!” message
displays if the option is not applicable to the vehicle under test.
Read Codes menu lets you read trouble codes found in the control unit. Typical menu options
To Next Page
Loading...
