Foxwell NT414 - Configure Beeper; Test Keypad

48
AutoMaster Pro NT414 Manual_English_V1.00
Figure 7-4 Sample Language Selection Screen
7.3 Configure Beeper
Selecting Beep Set opens a dialog box that allows you to turn on/off the beeper.
To turn on/off the beeper:
1. Scroll with the arrow keys to highlight Beep Set from Setup menu and press the ENTER key.
Figure 7-5 Sample Setup Screen
2. Press the LEFT/RIGHT arrow key select an item and press the ENTER key to save and return.
Figure 7-6 Sample Beeper On/Off Selection Screen
7.4Test Keypad
Selecting Key Test option opens a screen that allows you to check the functionality of the keypad.
To test the keypad:
1. Scroll with the arrow keys to highlight Key Test from Setup menu and press the ENTER key.