Framery O
Keep the work site tidy and free from debris throughout the installation,
maintenance, or disassembly process.
Do not climb on top of the product or place any load on the roof of the product.
Do not move the finished product by pushing if the optional wheels are not
engaged.
The product is very heavy. Moving the product after installation without
engaging the optional wheels is not allowed.
1.6.2 Electrical safety
Input for the electrical system: 100-240 VAC (10 A) 50-60 Hz
The maximum load for the electrical system is 6.6 A.
DANGER!
To reduce the risk electric shock, obey the following:
Disconnect the power cord from the power outlet before starting any cleaning,
maintenance, or disassembly procedures.
The power cord serves as a power disconnect device for pluggable equipment.
The power outlet shall be located near the equipment and shall be easily
accessible.
WARNING!
To reduce the risk of burns, fire, electric shock, or injury to persons, obey
the following:
Connect the power cord to a properly grounded outlet only.
This product is for use on a nominal 120-volt circuit and has a grounding plug
that looks like the plug illustrated in the figure below. Make sure that the product
is connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
Complete care instructions
info@frameryacoustics.com
7
To Next Page
Loading...
