Framery O
1.6.5 Moving the product on wheels (optional)
WARNING!
The product is very heavy. Moving the product on the wheels requires
planning and care. Make sure the product cannot tip over while moving.
Only move the product on even surfaces: no cracks or thresholds over 3 mm
(1/8 in) on the intended route.
When moving the product, only push below the vertical middle. Do not tow the
product.
Do not enter the product if it is standing on the wheels. It is only allowed to use
the wheels for moving the product. Return the full weight of the product onto the
leveling feet immediately after relocation and level the floor.
Complete care instructions
info@frameryacoustics.com
9
To Next Page
Loading...
