Variable Default setting Description
offset 0,0 deg Turntable offset
limit_max 200,0 deg Turntable limit +
limit_min -200,0 deg Turntable limit -
speed_ttab 10 Turntable speed
step_ttab 10 deg Turntable step
offset_h 0,000 m Antenna mast horizontal offset
offset_v 0,000 m Antenna mast vertical offset
limit_h_max 4,000 m Antenna mast hor. limit +
limit_h_min 0,800 m Antenna mast hor. limit -
limit_v_max 4,000 m Antenna mast vert. limit +
limit_v_min 0,800 m Antenna mast vert. limit -
speed_ant 10 Antenna mast speed
step_ant 0,100 m Antenna mast step
heigh 4,000 m Antenna mast height
init 0,800 m Initialisation point
offset_h2 0,000 m Antenna mast 2 horizontal offset
offset_v2 0,000 m Antenna mast 2 vertical offset
limit_h_max2 4,000 m Antenna mast 2 hor. limit +
limit_h_min2 0,800 m Antenna mast 2 hor. limit -
limit_v_max2 4,000 m Antenna mast 2 vert. limit +
limit_v_min2 0,800 m Antenna mast 2 vert. limit -
speed_ant2 5 Antenna mast 2 speed
step_ant2 0,100 m Antenna mast 2 step
height2 4,000 m Antenna mast 2 height
init2 0,800 m Initialisation point antenna mast 2
Variables of default.set
➔ Click on Program/Load settings to load a predefined setup file.
➔ Click on Program/Save settings to overwrite the default settings or to create as many
different setup files as you want.
➔ Click on Program/Info to show the version number of the software.
➔ Click on Program/Quit to exit the application software.
MA_FC02_(Rev2_1) - 9/06 / Version 1 / Rev:2.1
16 / 24
To Next Page
Loading...