2.0 Introduction
The FC 02 is a positioning controller developed for using the different positioning devices developed by
Frankonia.
This controller allows any user to control in the meantime several devices as turntables, antenna mast,
slide clamp bar, etc …
The FC 02 offers different ways of control by providing serial RS-232 as well as GPIB (IEEE488.2)
interfaces.
The connection to the different devices is made using optic fibers duplex cables in order to avoid any RF
interferences, which could be conducted along wire cables.
Complete software with an attractive and ergonomic design is delivered with each controller in order to
control the devices manually and also to have a display of the operations in real time.
MA_FC02_(Rev2_1) - 9/06 / Version 1 / Rev:2.1
4 / 24
To Next Page
Loading...