3.0 General description
The FC 02 is delivered in a 1U – 19” rack size in order to win a lot of space into the system units rack.
Also the depth is half size and doesn’t need any additional fixation kit.
Only a power switch with light is available on the front.
At the rear all the communication ports and optic connections are installed.
The FC 02 integrates a flash memory. The firmware could be easily upgraded via the RS232 port linked to
a PC. The firmware upgrade will be available on our website in the download section as well as a detailed
description of this procedure. This offers also the possibility to modify easily our positioning controller in
order to solve some communication problems with some testing software.
Front Panel Features
[1]: Power
Line switch turns the FC 02 on and off
Rear Panel Features
The FC 02 uses only 2 optic fibers channel for controlling up to 16 different devices.
The basic version of this controller is able to control one turntable and two antenna masts.
[2]: Power input
Input for the line power source.
Line Fuse: Replace only with a fuse of the same rating. See the label on the rear panel.
[3]: Voltage selector - verify that the product is set to match the available line voltage
MA_FC02_(Rev2_1) - 9/06 / Version 1 / Rev:2.1
5 / 24
To Next Page
Loading...