The FC 02 can be connected in parallel into the GPIB chain and can receive orders as the whole
instrumentation in automatic mode. Our software will display the operation in course in the meantime
(several windows could be open on the computer PC1).
Also orders can be given manually to the FC 02 using our software.
Automatic mode with instrumentation
The FC 02 could be connected also to 2 separate computers if needed.
This offers the possibility to get the display on a separate computer using the RS232 port if needed.
Automatic mode with 2 computers
MA_FC02_(Rev2_1) - 9/06 / Version 1 / Rev:2.1
8 / 24
To Next Page
Loading...