Franke 2DCV-18 User Manual

-19011150- • Rev. C • June 14, 2018
8
3. Locate drawer lock on the front of each drawer
slider. Push down and pull the drawer locks
toward front of the drawers until they pivot
upward (Fig. 15).
Fig. 15
4. Lift drawer front slightly, and pull forward to
remove (Fig. 16). Set the drawers on a clean
surface, such as a cart.
Fig. 16
5. Pull the drawer sliders out as far as they will go
(Fig. 17).
Fig. 17
6. Push back on the slider lock to release the lock
(Fig. 18).
Fig. 18
7. Lift the front end of each drawer slider, and
slide free from the rails in the interior of the
refrigerated cabinet (Fig. 19).
Fig. 19
Drawer Installation
To reinstall the drawers:
1. Push each drawer slider completely back into their
rails inside of the refrigerator cabinet. Pull the
slider lock forward to re-engage the lock (Fig. 20).
Fig. 20
OPERATION

Franke 2DCV-18 Specifications

General

Brand	Franke
Model	2DCV-18
Category	Freezer
Language	English