1T 310'177 Operating Manual Ecolino Erstellt: 01.05.2002 Rev.: C SL: 20'987 BJC
page 13
3 OPERATION
3.1 Daily Operation
3.1.1 Operational readiness of the coffee machine
1. Before switching on, the following points must be observed:
a) The water supply has been opened
b) The coffee machine must be connected to the power supply
c) The coffee bean containers have been filled
2. The display shows E.S.M.
E.S.M. =Energy Safing Mode 15:00 10.04.1997
3. When the E.S.M. key is pressed, all keys light up briefly and the illuminated display shows:
startup
15:00 10.04.1997
4. After the operating temperature has been reached, the
following message is displayed:
- The appropriate program automatically switches the machine ON at a certain time
- During the heat-up phase, a steam surge occurs every minute.
IT MUST NOT BE WORKED UNDERNEATH OF THE OUTLETS, DANGER OF SCALD!
- The coffee machine is now ready for operation.
3.1.2 Preparation of coffee products
1. Push outlet to desired height
2. Place cup under the outlet
3. Select desired product
4. The display shows select product
presele. 1 draw 1
- Depending on the programming, several products can be chosen. These can be reset or
cancelled with the Stop key.
- Tea or steam can be dispensed simultaneously.
locked selection
water feeding
locked selection
heating
- If the on/off function has been programmed with the
Adjust Card (customized) the Adjust Card must be
inserted. Now, the Ecolino will be switched on
automatically without pushing the E.S.M. button.
select product
15:00 10.04.1997
To Next Page
Loading...
Need help?
General
