Cleaning the stainless steel surfaces
NOTICE
Rust on stainless steel surfaces!
Abrasive cleaning agents and sharp objects cause iron residue that can rust.
- Do not use abrasive cleaning agents, steel wool, brushes, scrapers or other sharp objects for
cleaning.
- Use cleaning fleece made of artificial fibers to remove stubborn dirt.
- Clean the stainless steel surfaces with a moist cloth (lukewarm water and neutral soap).
- Wipe clean with clear water.
- Wipe dry thoroughly.
Removing limescale deposits and lime stains
If cleaning with a neutral soap is not sufficient, limescale deposits can be removed with a 25%
solution of vinegar. Give the vinegar solution time to act, rinse with clear water and wipe dry.
To Next Page
Loading...
Need help?
General
