Franke F3D3SP User Manual (English)

Other manuals for Franke F3D3SP

Questions and Answers:

S
scobbAug 20, 2025
What to do if Franke F3D3SP freezer is not running?
- J
  John FigueroaAug 20, 2025
  If the Franke Dispenser freezer isn't running even when the power switch is on, there are a few things to check: * Ensure the power connector is properly plugged into the socket. If it isn't, connect it and switch on the power. * Try plugging the connector into another power socket to rule out a faulty socket. If the socket is faulty, have it repaired by an electrician. * Check the fuse to see if it has tripped. If it has, reset it.
I
Isabella KaiserAug 22, 2025
Why is my Franke Dispenser freezer not cold enough?
- E
  Emily DavisAug 22, 2025
  If your Franke Dispenser freezer is running but not reaching the required temperature of -18°C, consider the following: * Check for ice formation on the inside walls, especially on the temperature sensor. If there's ice, remove all items from the appliance and defrost it. To prevent ice buildup, avoid leaving the freezer door open longer than necessary and defrost daily. * Inspect the filter for soiling and clean it if necessary. * Examine the condenser ribs for soiling and clean them if needed.
Y
Yvette AllenAug 25, 2025
What to do if Franke F3D3SP shows Err04 and won't dispense?
- A
  Andrew ThompsonAug 25, 2025
  If your Franke Dispenser isn't dispensing and shows error message Err04, it means: * The hopper is empty. You should fill the hopper with fries and press the [Reset] button to begin the filling process. * Fries are baked together in the hopper forming a hard "bridge". You should shake the hopper to redistribute the fries and break up the clumps, carefully so as not to break the fries. If necessary, remove very hard clumps, then press [Reset] to start the filling process.
C
Cody MeadowsAug 26, 2025
Why is the reset button flashing on my Franke F3D3SP?
- A
  Amber BeardAug 26, 2025
  If the ACTION-3 [Reset] button on your Franke Dispenser is flashing, it indicates: * The filling process was prematurely aborted. Press the [Reset] button to restart the filling process. * Fries in the hopper have formed a "bridge." Shake the hopper to redistribute the fries, carefully breaking up any clumps.
J
Jonathan JonesAug 28, 2025
What does low product warning mean on Franke F3D3SP Dispenser?
- A
  Angel SmithAug 28, 2025
  If you see the [Low product warning] error message on your Franke Dispenser, it means: * The hopper has a low filling level (only 3–4 fillings left). Refill the hopper with fries. Be aware that if the machine dispenses until the hopper is completely empty, the filling process will be aborted, and error message Err04 will appear. * Frozen fries have created a hollow space around the sensor in the hopper. Shake the hopper to redistribute the fries and close the hollow space, being careful not to break the fries.
S
Sarah LloydAug 30, 2025
Why won't the drum turn on my Franke F3D3SP Dispenser?
- S
  shelby11Aug 30, 2025
  If the drum on your Franke Dispenser isn't turning, it could be due to: * An empty hopper. If the screen displays the error message Err04 and the Action–3 [Reset] button is flashing, fill the hopper with fries and press [Reset] to begin the filling process. * Fries baked together forming a "bridge" in the hopper. If the screen displays the error message Err04 and the ACTION–3 [Reset] button is flashing, shake the hopper to redistribute the fries and break up the bridge. Proceed carefully so as not to break the fries, then press [Reset] to start the filling process.
J
Jennifer DavisSep 1, 2025
Why are the loading weights incorrect on my Franke Dispenser?
- C
  cjordanSep 1, 2025
  If the loading weights on your Franke Dispenser are consistently incorrect, check the following: * Ensure the deflector is present in the hopper. If it's missing, slide it in. * Inspect the deflector for any damage, such as cracks. If damaged, replace it. * Verify that the freezer bottom is correctly positioned. If not, take it out and reinsert it properly.
J
Jamie JosephSep 3, 2025
How to turn on dispenser lanes on Franke Dispenser?
- T
  Tammy BanksSep 3, 2025
  If you're unable to switch on the dispenser lanes on your Franke Dispenser, check these: * Make sure the unit has line power by switching on the power switch. * Ensure you press the ON/OFF button for a full 4 seconds until the button LEDs light up.
J
Jaime SmithSep 5, 2025
What to do if Franke F3D3SP shows Err02 or Err07?
- D
  Daniel SolomonSep 5, 2025
  If your Franke Dispenser isn't dispensing and shows error message Err02 or Err07, it means the bucket is missing. Insert the bucket.
S
sarahedwardsSep 7, 2025
Why won't the freezer door close on my Franke Dispenser?
- A
  Austin HillSep 7, 2025
  If the freezer door on your Franke Dispenser isn't closing properly, it might be because the hopper(s) is/are not correctly engaged in the drum hub. Press the hopper into the appliance, turning the drum at the handle if necessary.