ACTION–1 button: Performs the ac-
tions that are displayed on the screen
– Inc (= increase)
ATTENTION symbol (with 3 LEDs at the corners):
Indicates the status of the dispenser lane:
- Lamps are off: The appliance is ready to operate.
- Lamps light up: Indicates a low filling level. The appliance continues to dispense fries.
- Lamps flash: Indicates an error. The screen displays an error message.
BASKET symbol (with 7 green
LEDs):
When the BASKET symbol
lights up, the dispenser lane is
ready to dispense the product
into the frying basket.
ACTION–3 button: Performs the actions that are dis-
played on the screen – OK (= confirm), Reset, 2 LEDs
flash!
ACTION–2 button: Performs the ac-
tions displayed on the screen – Dec
(= decrease).
LCD screen:
- Displays the current operating
temperature of the freezer.
- Displays error messages and pos-
sible causes.
- Displays the appliance setup and
diagnosis programs with possible
measures or decision options.
ON/OFF button: For switching on the
dispenser lane. Press for 4 seconds until
both LEDs light up.
Control panel for the dispenser lane
There is one control panel for each dispenser lane. The dispenser lanes can be operated sepa-
rately. If necessary, one of the dispenser lanes can be switched off (F3D3P–Dual Lane).
. BEFORE STARTING UP FOR THE FIRST TIME
Before starting up for the first time, all components of the appliance must be cleaned.
Cleaning removable components
The removable components are located, firstly, in the appliance itself and, secondly, in the ac-
cessories box (see scope of delivery).
To Next Page
Loading...
Need help?
General
