- Remove the access plate to the condenser.
- Remove the filter from the appliance.
- Free the condenser ribs of dust and dirt using a brush with soft bristles or a vacuum cleaner.
- Insert the filter.
- Close the access plate.
CAUTION
Risk of injury!
The condenser ribs are sharp. Contact may result in cutting injuries.
- Do not touch the condenser ribs.
- Wear gloves if necessary.
Brush with soft bristles
Alternative:
Vacuum cleaner
Required tools/material
1 x monthly
Cleaning interval
. CUSTOMER SERVICE (ELECTRIC COMPONENTS)
- In case of malfunction, contact technical customer service.
- Please provide the item number and type. This information is located on the rating plate.
To Next Page
Loading...
