- It may only be used for its intended purpose.
- The appliance is not suitable to be set up and used outdoors. It is intended for use in kitchens
where it is protected against the weather, excessively high temperatures and humidity, and a
corrosive atmosphere.
DANGER
Risk of fatal injury from electric shock!
- If the appliance is damaged or malfunctioning, disconnect it from the power supply before per-
forming repair, maintenance or cleaning work.
- Adhere to the safety instructions on the appliance itself (see figure), such as on the power
supply filter housing.
- Do not connect the appliance to the power supply if the connection cable is damaged. Have
the damaged cable replaced with an equivalent cable by a qualified electrician. Do not put the
appliance back into service beforehand.
- Never repair the appliance yourself.
- Have the necessary repairs carried out by a qualified specialist with original spare parts.
Moisture on the electrical components can lead to a short circuit and to serious or even
fatal injury on contact.
- Never clean the appliance with a direct water jet, a sponge or a high-pressure water jet.
- Never connect the appliance to the power supply while the appliance is wet.
- Disconnect the appliance from the power supply immediately if the appliance becomes wet
during operation.
. SAFETY INSTRUCTIONS
WARNING
Danger of fire!
The cooling circuit is filled with R290 (propane)*. Propane is highly flammable. The cooling
coils are contained in the side walls. If the cooling coils are damaged, highly flammable
propane will escape.
An analysis or repair of the cooling system is only allowed under certain conditions!
- Never repair the cooling system yourself!
- If you experience problems, contact the technical customer service. The appliance may only
be repaired by a refrigeration technician under certain conditions!
- Read the chapter “Maintenance/repair”!
* only F3D3SP/F3D3P
To Next Page
Loading...
Need help?
General
