Why no Err04 when Franke F3D3SP Dispenser hopper is empty?
If the hopper in your Franke Dispenser is empty but error message Err04 isn't showing, the "Low product" sensor may be soiled. Clean the "Low product" sensor.
Why is the basket symbol not lit on Franke Dispenser?
If the basket symbol on your Franke Dispenser isn't lighting up, it means the dispenser lane is switched off. Press the ON/OFF button for 4 seconds until the button LEDs light up.
Why won't the filler doors open on my Franke Dispenser?
If the filler doors on your Franke Dispenser aren't opening to dispense fries, wait for the BASKET symbol to light up. Once it does, the fries will be dispensed.
Why can't I change the load size on my Franke F3D3SP?
You can't change the load size on the Franke Dispenser operator panel if the filling process isn't finished yet. The filling process is complete when the BASKET symbol LEDs light up and [Ready] appears on the screen. Then you can change the load size.
What to do if filler doors won't close on Franke F3D3SP?
If the filler doors on your Franke Dispenser aren't closing after dispensing fries, it's likely that fries are jammed in the filler doors. Remove all fries from the filler doors.
Provides critical safety warnings for electrical shock, fire, and general handling.
Details on connecting the appliance to the power supply, including voltage checks.
Process for loading frozen fries into the dispenser hopper once the operating temperature is reached.
How to select the load size and dispense fries into deep fryer baskets.
Safety warnings and procedures for issues concerning the cooling system.
Explains error codes displayed on the control panel and provides corresponding remedies.
Lists common problems, their potential causes, and recommended solutions.
To Next Page
General
