Roll the appliance into posi-
tion and block the brakes of
the front castors.
OptionOption
Mount the side basket wire
rack (if present)
Position the collecting pan
under the basket wire rack.
Place the upper basket wire
rack onto the cross supports.
Tip:
If the hub is not fully engaged,
the hopper will not be in the
right position and the freezer
will not be able to close.
In this case, turn the drum
slightly at the handle until the
hub fully engages.
Insert the hopper. Ensure that
the hub is fully engaged in the
drum. Turn the drum at the
handle if necessary until the
hub engages.
Slide the deflector into the
hopper with the short side
first.
Insert the lower basket wire
rack.
Insert the lower drip pan.
Insert the freezer bottom
with the right orientation. The
slanted surface must face
down and toward the rear.
Press it down.
Insert the wire rack (in the
freezer above the hopper(s)).
Only for dual lane models
Insert the crumb tray.
To Next Page
Loading...
Need help?
General
