Dismantling Washable Parts
• To remove the side grilles protecting the
fans, lift up the stop tooth using a knife or
screwdriver and turn the grilles in the direc-
tion indicated by the arrow.
• Grasp the fans in the holes provided and
pull to extract.
CLEANING
• Wash the fans and the protection grilles,
using normal washing-up liquid. These
elements can also be washed in the dish-
washer.
• Using a damp cloth and a suitable deter-
gent, clean the body of the suction device,
taking great care not to allow any water to
leak into the inside of the unit or into the
connector housings.
• Leave until completely dry bifore reassem-
bling.
• Using a brush, clean the air outlet pipe as
far as you can reach.
F
R
E
E
L
O
C
K
O
P
E
N
To Next Page
Loading...
Need help?
General
