Franke PURA FRESCO User Manual

i
16:04
VIIIII II
16:04
I
III IVII
Configuration
Page 45
1/1
1/1
Before you can adjust the product setting, you must select a product
under the menu item 1.1 Select product key.
Continued on next page.
4 Select parameter.
• Boiler temperature correction.
• Low: - approx. 5 °C.
• Normal: No correction.
• High: + approx. 5 °C.
4 Select parameter.
• Wait time between pre-injection
and actual brewing process.
• None: No pre-injection.
• Short: Wait time 1.0 second.
• Medium: Wait time 1.5 sec-
onds.
• Long: Wait time 2.0 seconds.
4 Adjust the quantity using +/- .
• Correction of the brewing water
and grind quantity.
• Max. adjustment +/- 20% of set
value.
4 Select product.
Changes can be checked
without leaving the menu
by pressing Prepare test
product.
The source of supply is al-
ways shown under the menu
item Grind quantity coffee
type left. Depending on the
configuration, the source of
supply may vary.
Confirm changes by pressing
OK. Changes are canceled
by pressing EXIT.
Next page
Next page
EXIT
Teacup
Tea mug
2
Latte
Hot water
Long
High
Medium
Normal
Short
Low
None
Latte
Previous page
Previous page
OK
Coffee
2 Coffee
small
Coffee
small
Prepare test product
Temperature
Pre-inject
Grind quantity coffee type left
Brewing water quantity
Basic product coffee
1.2 Modify product settings
1.1 Select product key
Next pagePrevious page
5 Counters
4 Operating mode
3 Temperatures
2 Clock
1 Products
Normal
Short
14 (Latte)
+-
Brewing water quantity
Coffee temperature
Pre-inject
Select product key
Customer menu
Customer menu
Customer menu
Customer menu
Customer menu
(1/2)Select menu item
1 Products

Franke PURA FRESCO Specifications

General

Brand	Franke
Model	PURA FRESCO
Category	Coffee Maker
Language	English