Explanation of symbols
Page 4
Status
Symbol Designation Description
Water tank
Operation with a water tank
Water connection
Operation with a water connection
1
Heating
Boiler 1 is heating.
Pump
Pump 1 is pumping water.
Fresh milk
Fill level and temperature of fresh milk (Pura
fresco only)
Navigation
Symbol Designation Description
Product level
Press to switch to the Product level to prepare
drinks.
Maintenance level
Press to switch to Maintenance level to
perform maintenance tasks or adjust the
configuration.
Next page/Previous
page
Press to scroll through menus with multiple
pages.
Up one level
Press this button to move up one level in the
menu.
DE
Language selection
Press to change the language (if programmed).
Caring for the machine
Symbol Designation Description
Standby
Press to put the machine in standby mode.
Activate wipe protec-
tion
Deactivates the display for 20 seconds. For
non-hazardous wiping of the control panel.
Rinse
Press to start the rinsing process.
Clean
Press to start the cleaning process.
Descale
Press to start the descaling process.
Rinse water filter
Press to rinse the water filter.
Info
Press for machine information (software ver-
sion, machine type, serial number, installation
number).
Program
Press to access the Programming menu.
Products
Symbol Designation Description
Cancel
Press to cancel a product or setting.
2
Product repetition
Press to prepare two of the same product at
the press of a button. The products are prepa-
red one after another.
Powder type
Press to select the desired powder type.
Coffee type
Press to select the desired coffee type.
Symbols used in the software
To Next Page
Loading...
Need help?
General
