Franke SAPHIRA - Programming the Temperature; Programming the Water Quantity; Programming the Milk Quantity

Instruction for use Saphira Page 45 18.06.04 / Rev D / Maks 4 / PPB
16.2. Programming the temperature
 Press the + button (27) to reach the TEMPERATURE function.
 Display: ADJUST
TEMPERATURE
 Display: SELECT
PRODUCT
 Press the desired product button.
 Display: (Selected product)
TEMP. NORMAL
 Select the desired temperature (high or normal) using the + (27) or – (28) button.
 To save the setting, press the PROG. button (26).
 Display: ADJUST
TEMPERATURE
 Display: SELECT
PRODUCT
 Press another product button, the + button (27) to reach the next function or the EXIT button (30) to
exit the programming.
16.3. Programming the water quantity
 Press the + button (27) to reach the WATER QUANTITY function.
 Display: ADJUST
WATER QTY.
 Display: SELECT
PRODUCT
 Press the desired product button.
 Display: (Selected product)
 WATER 90 ML
 You can adjust the value by pressing the + (27) or – (28) button.
 To save the setting, press the PROG. button (26).
 Display: ADJUST
WATER QTY.
 Display: SELECT
PRODUCT
 Press another product button, the + button (26) to reach the next function or the EXIT button (30) to
exit the programming.
16.4. Programming the milk quantity
 Press the + button to reach the MILK QUANTITY function.
 Display: ADJUST
MILK QTY.
 Display: SELECT
PRODUCT
 Press the button milk foam (25) or cappuccino(6)
 Display: (Selected product)
10 SEC.
 By pressing the + (27) or – (28) button, you can adjust the time (delivery time 3- 60 sec.)
 To save the setting, press the PROG. button (26).
 Display: ADJUST
MILK QTY.
 Display: SELECT
PRODUCT
 Press another product button, the + button (27) to reach the next function or the EXIT button (30) to
exit the programming.