Franke SAPHIRA - Entire Cleaning

Instruction for use Saphira Page 51 18.06.04 / Rev D / Maks 4 / PPB
18.3. Entire cleaning
Once started, the cleaning procedure may not be stopped. The procedure takes about 20 minutes.
 Switch on the Unit at the ON/OFF button (23).
 Press the button Clean (32) until an acoustic signal is heard.
 Display: SELECT
CLEANING - +
 Press the + button (27) twice.
 Display: ENTIRE
CLEANING
 Press the button Clean (32).
 Display: EMPTY
DRAWER (Fig.2 and Fig.3)
 Display: INSERT
TABLET (Fig.9)
 Display: CLEANER FOR
CAPPUCCINO
 Fill a vessel with 3 dl of fresh water and add about 5 caps of cappuccino cleaner. Dip the cappuccino
tube into it.
 Press the button Clean (32).
 Display: ENTIRE
CLEANING
 Display: PLEASE
WAIT
 The entire cleaning works
 An acoustic signal is heard
 Display: WATER FOR
CAPPUCCINO
 Display: PRESS
CLEANING
 Fill a vessel with fresh water and dip the cappuccino tube into it.
 Press the button Clean (32).
 Display: ENTIRE
CLEANING
 Display: PLEASE
WAIT
 The entire cleaning works
 Display: EMPTY
DRAWER (Fig.2 and Fig.3)
 The entire cleaning is finished
 Display: SELECT
PRODUCT