15
Inline 400 Protective Weather Cover
For outdoor vertical installations of the Inline 400, the enclosed protective weather cover should be used for maximum protection of the unit. It is not
recommended that the Inline 400 be installed horizontally for outdoor applications where the unit would be directly subjected to inclement weather.
Failure to use this protective cover in outdoor installations will void the warranty of the Inline 400 unit.
The installation of the enclosed protective weather cover is simple. After the Inline 400 unit has been installed, simply attach the protective cover over
the top of the unit using the reclosable fastener. The clear protective cover allows viewing of the operation lights of the unit, but does not allow access
to the user interface button. In order to press the user interface button, the cover must be removed. After the required button activation is completed,
the protective weather cover must be reassembled to the unit.
1. Vertically Mounted Inline 400
2. Protective Weather Cover
3. Reclosable Fastener
3
2
1
To Next Page
Loading...
Need help?
General