6
IN THE BOX
a. Inline Pressure Boosting System
b. Installation Manual
c. Pressure Tank (accessory if ordered & included with Inline 400)
All Franklin Electric Inline Pressure Boosting Systems are carefully tested, inspected, and packaged to ensure their arrival in perfect condition.
When the unit is received, examine it closely to make sure there is no damage that may have occurred in shipping.
If damage is evident, report this immediately to your shipping carrier and product dealer. The shipping carrier assumes full responsibility for the
shipment’s safe arrival. Any claim for damage to the shipment, either visible or concealed, must be made through the shipping carrier first.
STATUS DISPLAY
Solid Green
Indicates system is powered and is turned ON, but not currently running.
The green solid light will only be present when no faults are active.
Flashing Green
Indicates the pump is powered, turned ON, and running.
Solid Red
Indicates the control is powered but currently in the OFF mode.
Pressing the button will toggle the unit into the ON mode.
Flashing Red
Indicates a FAULT has occurred. The unit will automatically attempt to
restart. If an immediate restart is needed, the button can be pressed to
force a reset if the fault is no longer present. If the problem persists, a
qualified water professional should be contacted.
Button
The button can be used to turn the unit on or o. When the unit is powered
but in the OFF mode (solid red light), a press of the button will turn the unit
ON. If the unit is powered and in the ON mode (solid green light), a press
of the button will shut the unit OFF. The button can also be used to force a
reset after a fault.
To Next Page
Loading...
Need help?
General