Franklin Electric SUBMONITOR CONNECT Series User Manual

INSTALLATION AND SETUP
Programming: Advanced Setup > Communications
25
Programming: Advanced Setup > Communications
Programming: Advanced Setup > Timers
Mod
bus
RW RC Display Name Range Description
Modbus menu
N/A Com Control Enabled
Disabled (default)
Use these setting to set up Modbus communications for
the SubMonitor Connect.
In Modbus communications, a computer or master
communication device issues commands to one of the
network nodes and processes responses. Other devices
on the network do not transmit data without a request
from the master computer, and do not communicate with
each other.
Write Access Enabled (default)
Disabled
Com Loss Fault Enabled
Disabled (default)
Com Loss Time 1 to 120 seconds
(default = 10)
Baud Rate 9600
19200 (default)
38400
57600
76800
115200
Parity None; 1 Stop
Odd
Even
None; 2 Stop (default)
Modbus Address 1 to 247; default = 247
Bluetooth menu
N/A Bluetooth Enabled (default)
Disabled
Choose Enabled to use Bluetooth communication for the
FE Connect mobile app.
Mod
bus
RW RC Display Name Range Description
(MT1311/MT2211 only)
529 RW N Start Delay Enable Enabled
Disabled (default)
Enables or disables the Start Delay Time (for use with
Hand Mode and Auto Mode).
530 RW N Start Delay Time
(setting)
1 to 43,200; default = 1 Sets the amount of start delay time in seconds.
531 RW N Stop Delay Time Enabled
Disabled (default)
Enables or disables the Stop Delay Time (for use with
Auto Mode only).
532 RW N Stop Delay Time
(setting)
1 to 43,200; default = 1 Sets the amount of stop delay time in seconds.
(All models)
533 RW N Min Off Time Enabled
Disabled (default)
Enables or disables the Minimum Off Time (for use with
Hand Mode and Auto Mode).
534 RW N Min Off Time
(setting)
1 to 43,200; default = 1 Sets the amount of minimum off time in seconds.
535 RW N Min Run Time
Enable
Enabled
Disabled (default)
Enables or disables the Minimum Run Time (for use with
Hand Mode and Auto Mode).
536 RW N Min Run Time
(setting)
1 to 43,200; default = 1 Sets the amount of minimum run time in seconds.

Franklin Electric SUBMONITOR CONNECT Series Specifications

General

Brand	Franklin Electric
Model	SUBMONITOR CONNECT Series
Category	Relays
Language	English