OPERATION GUIDE
WINDOW DISPLAY
:
1. “Speed “window: Display the speed, the speed range is
0.8-18km/h
.
2.”Incline/ pulse” window: Under default state, this window will show inline from level 0 to level 18.
When the runner holds handle pulse with two hands, the system can calculate the runner’s heart beat
and window will display the runner heart beat, the range is 50-200 beats/min ( this data is just for
reference, can not be as the medical data).
3.” time” window: Display running time. Display the exercise time positive direction clock from 0
：
00-
99
：
59 ,when count to 99:59, the machine will stop smoothly and show ‘ End ‘, then enter into initial
situation after 5 seconds; When count down, it will show from the setting time to 0:00, when down to
0:00 , the machine will stop smoothly and show ‘ End ’, and will enter into the initial situation.
4.” distance/program” window: Under the initial situation , press the “program” button, the window will
display
“
P1
，
P2
， … … ，
P15
，
U1-U2-U3-FAT
”
Circulatory; During operation, display the running
distance positive direction clock from 0.00-99.9, when up to 99.9, it will count again from 0; When count
down, it will show from setting data to 0; When down to 0, the machine will stop smoothly and show ‘
End ’, enter into the initial situation after 5 seconds.
5.” Calories/Counter” window: Display runner’s calories worked out and steps that the user has walked
by switch .When display steps, it will count form 0 to 999, when up to 999, it will count again form 0.
When display calories, it will count from 0 to 999, when up to 999, it will count again from 0; when count
down, it will count from the setting data to 0, when down to 0, the machine will stop smoothly and show
‘ End ’, and enter into the situation waiting for operation after 5 seconds.
BUTTON FUNCTION:
1. “ Program ” button: Under initial situation, press this button to choose the program from “0.00”
、
“ P1-
P2-P3-P4-P5.....P15-U1-U2-U3-FAT” 15 programs; “0.00” is the system default running mode, “P1-P15”
are pre-set programs,U1-U3 is self-define program, FAT is the body fat test function.
2. “ MODE ” button: Press this button to choose “
“
0
：
00
”、“
15
：
00
”、“
1.0
”、“
50
”
circularly(0.00
is the manual running mode, “15:00” is time counting down mode, “ 1.0 ” is distance counting down
To Next Page
Loading...
